|
Industrial - BOGE Air Receivers |
|
 |
1. |
BOGE Compressed Air Receiver, Horizontal
Industrial - BOGE Air Receivers
Compressed air receivers, operating pressure 11 bar, horizontal from 18 to 5000 litres.
Compressed air receivers, operating pressure 16 bar, horizontal from 50 to 5000 litres.
|
|
 |
2. |
BOGE Compressed Air Receiver, Vertical
Industrial - BOGE Air Receivers
Compressed air receivers, operating pressure 11 bar, vertical from 270 to 5000 litres.
Compressed air receivers, operating pressure 16 bar, vertical from 250 to 5000 litres.
|
Industrial - BOGE Dryers |
|
 |
3. |
BOGE DACZ Series Dessicant Dryers
Industrial - BOGE Dryers
BOGE DAZ series adsorption dryers and BOGE DCZ activated carbon adsorber with pre-filter and after-filter. Heatless adsorption dryers with built-in activated carbon adsorbers are installed where the compressed air is required to have a residual oil content down to 0.003 mg/m3 and a pressure dewpoint down to -70oC.
- Complete and ready for use
- Robust, flexible adsorption principle
- Economic, trouble free operation
- CFC free.
Technical Spec: Flow Capacity 8 950 m3/h, 4 559 cfm, Maximum operating pressure 10 and 16 bar, 150 and 230 psig
|
|
 |
4. |
BOGE DAV Series Dessicant Dryers
Industrial - BOGE Dryers
BOGE DAV series adsorption dryers. Externally heated regeneration and vacuum purging complete with pre-filter and after-filter. Heat regenerated adsorption dryers are more economic than heatless adsorption dryers. Available with higher outputs and pressure dewpoints down to -70oC.
- Low energy system
- 2-stage drying
- Low regeneration temperature
- Intensive cooling
- Consistent pressure dewpoint.
Technical Spec: Flow Capacity 420 14500 m3/h, 247 8526 cfm, Maximum operating pressure 10 bar, 150 psig
|
|
 |
5. |
BOGE DAZ Series Dessicant Dryers
Industrial - BOGE Dryers
BOGE DAZ series adsorption dryers, heatless with pre- and after filters. Heatless adsorption dryers with pressure dewpoints down to -70oC are suitable when D series refrigerant dryers with pressure dewpoints of +3 to + 7oC will not meet the requirement.
- Complete and ready for use
- Robust, flexible adsorption principle.
Technical Spec: Flow Capacity 8 6100 m3/h, 4 3587 cfm, Maximum operating pressure 10 and 16 bar, 150 and 230 psig
|
|
 |
6. |
BOGE DB, D Series Refrigerant Dryers
Industrial - BOGE Dryers
Refrigerant dryers are one of the most economical methods of treating compressed air. By cooling the compressed air down to near freezing point, the water and oil vapour are condensed and particles of dirt are bound together, the resulting condensate is then separated from the air flow.
- Consistent high quality compressed air
- Saving on running costs by avoiding high compression
- Environmentally friendly operation.
Technical Spec: Capacity 0.167 208 m3/min, 6 7350 cfm, Maximum operating pressure 16 bar, 230 psig
|
|
 |
7. |
BOGE DM Series Membrane Dryers
Industrial - BOGE Dryers
Compressed air always contains humidity, traces of compressor oil and particles of dust. These impurities can lead to serious problems. Pockets of corrosion or deposits can form on tooling and pneumatics, reducing efficiency and spoiling product quality. Maintenance work is required resulting in costly downtime. Dry compressed air can save you money! BOGE Membrane Dryers can be installed in the pipeline of a system or installed as part of a screw or piston compressor assembly.
- Compact unit
- CFC free
- Electrical energy savings (no moving parts, no motors)
- Technically oil free compressed air.
Technical Spec: Flow Capacity 102 2855 l/min, 3.60 100.78 cfm, Maximum operating pressure 12 bar, 175 psig
|
Industrial - BOGE Filtration |
|
 |
8. |
BOGE F, FP Series Micro Filters
Industrial - BOGE Filtration
BOGE Micro Filters separate out extremely fine impurities in the compressed air. BOGE micro filters remove solids from compressed air with an efficiency of 99.99999% relative to 0.01 ėm and a residual oil content up to 0.01 mg/m3. Cost-efficient use of BOGE micro filters as the main filter in the compressed air line or as an end-of-line filter upstream of pneumatic equipment.
Technical Spec: Max operating pressure 16 bar. More information on request.
Option: FP/A series; includes aluminium housing with threaded connector as per DIN 2999 FFP/AF series; includes steel housing with flanged connector as per DIN 2633.
|
|
 |
9. |
BOGE V, VF Series Preliminary Filters
Industrial - BOGE Filtration
Preliminary filters separate out coarse impurities from the compressed air. BOGE preliminary filters remove solids from compressed air with an efficiency of 99.99% relative to 3 ėm. Cost-efficient use of BOGE preliminary filters - upstream of compressed air dryer and micro-filter;
- For applications where the intake air has a very high dust content
- For compressors with a high oil carry-over characteristic.
Technical Spec: Max operating pressure 16 bar. More information on request.
Option: VF series; includes steel housing with flanged connector as per DIN 2633.
|
|
 |
10. |
BOGE Z Series Cyclone Separators / Compressed Air Filters
Industrial - BOGE Filtration
BOGE high capacity cyclone separators remove liquids, fine mists and solids from the compressed air. Cost efficient use of BOGE cyclone separators - Directly downstream of the compressor;
- If no compressed air receiver is fitted
- If a compressed air receiver is a long distance away
- If the compressed air pipeline rises vertically
Technical Spec: Max operating pressure 16 bar. More information on request.
|
|
|
 |
)
)
)
)
)
)
)
)
)
)